Wilhelm Reich and orgone provided by PORE = Public Orgonomic Research Exchange -- **last update (2003feb12) ---© Copyright 1995-2006

ORAC forum

Hello Jogg,

Thank you for responding to my message. Please do post this information on the healing materials for other interested people to investigate. The following is a more detailed description:

These healing devices are for all people and will help create or enhance a healing response in the body. The only side affect reported to me is that after 2-4 hours some people may become overstimulated. Other people have no problem wearing them for extended periods of time.

I always caution that the SEA Pendant devices do not replace professional medical advice and treatment.


In February 1997, shortly after returning home from a trip to the Grand Canyon with my wife Kathy, I had a dream in which a woman told me that using Mylar and Rayon together would double Reiki energy. Reiki is a subtle healing energy that many practitioners today access.

Since that time I have put together many prototype devices using Mylar plastic and Rayon fabric. Unfortunately these materials when used together are much too powerful and uncomfortable. A man named Doug Tipple wrote to me some time later and discussed a device he put together after reading an old posting of mine on a healing bulletin board. His device used alternating layers of silver-backed Mylar plastic and Rayon fabric in 2" squares that formed an energy cell. Four to five of these energy cells were then sewn into a cotton fabric wrist band and
fastened with Velcro. Cotton fabric helps soften the subltle energy into a more nurturing feel. Doug sent me samples of his bracelets and I shared them with family and freinds. I recieved very positive feedback on how they significantly increased subtle healing energy with reports of mitigation in the affects from depression, carpal tunnel syndrome. Most people felt a sense of well being.

Continuing on my quest for the perfect blend of healing materials, I am now using Acrylic felt fabric, Cotton fabric, non-metallic Mylar plastic, and two glass marbles that make up a SEA (subtle energy activator) Pendant and SEA Bracelet. These devices are very simple in design and are inexpensive to make. I personally feel that the metallic backing on Mylar interferes with the healing frequencies and opt not to use Mylar in that configuration.

Presently, I do not use Rayon fabric in the SEA pendant devices. However, Rayon can be substituted for the Cotton fabric squares that are currently used. My feeling is that Rayon in this configuration will help best for mental and emotional issues.

Here is a materials list:

1. Non-metallic Mylar plastic: Mylar is commonly used in balloons and in gift wrap. It often has a shiny-mirror-like metallic backing to it. Mylar is the trade name of the Dupont Co. USA . It is classified under a
family of plastic called PET material. One can purchase Mylar plastic at a local party supply or gift wrap store. It is also sold in office supply stores and used as clear plastic sheets in overhead projection overlays. Mylar is the key to these healing devices. As I mentioned before, I feel that metallic backed Mylar causes unwanted interference in the healing frequency.

2. Acrylic felt fabric: Acrylic felt has a wonderful feel to it and by itself enhances subtle energy. I suspect that Acrylic is used in many healing devices marketed today.

3. Cotton fabric: Cotton is used as part of the healing material combination. Along with the Acrylic felt, it helps in blending the energy of the Mylar plastic and softening it to a more nurturing feel.

4. Two glass marbles: Glass marbles are used to magnify the healing frequency of the material combination. Not many people today know that glass will do this when linked with Mylar. I consider glass to work
similar to a natural crystal.

5. Cotton or Acrylic string: Solid or braided is okay. The string is used to tie off the middle and ends of the SEA Pendant devices.

Here is how to put a SEA Pendant and SEA Pendant bracelet together:

1. Cut out a 3"by4" square of Acrylic felt fabric for a Pendant and a 3"by 6" piece of Acrylic felt for a bracelet.

2. Place two strips of Mylar plastic side by side in the middle of the Acrylic felt fabric near on edge.

3. Place one small Cotton fabric square on top of each strip of Mylar respectively (two used).

4. Place one glass marble on each Cotton square(two marbles used).

Roll the materials up into the Acrylic felt. Use clothes pins to hold the ends while you tie the middle and ends with string. For the Pendant, trim off the excess materials. Tie a loop in the middle with the string in order to run a Nylon cord thru it in order for it to hang around the neck.

The extra long ends of the bracelet are wrapped aroung the wrist and fastened with a safety pin.

No magnets or metallic material is used with the SEA Pendant devices except for the metal safety pin used with the bracelet. I purposely made these designs easy and inexpensive to make.

I encourage interested people to contact me if they have further questions or want to share their experiences with these healing devices.

Best wishes, Tom Jacobs

AOO Forum

Is there anyone who has knowledge of building an accumulator using a steel tank filled with water and buried 90% underground? I live in an area that is not conducive to a normal atmospheric accumulator, due to proximity to high tension power lines and a nuclear power plant. Is there a book that I can be referred to?

Thanks in advance ...Dave

Orgone Accumulator for sale.

If interested, please call Sarah at (212) 924-1533 or e-mail Sharon at shaman1@concentric.net

Original Orgone Accumulator constructed in Rangley, Maine

Side pieces - depth - 30 3/8"; width 24"
Front and back doors - Height 55 5/8"; width 24"

Price: Any reasonable offer Shipping: Discussable

Dear Folks, I have done the temperature experiment with a small ORAC and
want to build a full size one. Does anyone in Canada, esp. the Montreal area
know where to buy rolls of steel wool? Larry redlionpress@hotmail.net

Also with my query about steel wool, is there anyone in the Montreal area who knows how to buy it in bulk it
would save the hassel of duty, etc., Yours, Larry

ORAC forum

From: Joachim Trettin <Jo_Trettin@compuserve.com>

To the Orgonomy Mail List - reply:

We want thank PORE, which is the host of this Orgonomy Mail List (this is the right name) and everybody who works in orgonomy should know this name in USA. PORE is exemplary and leading for good communication and information style in orgonomy. There you can find the best informations about leading groups in orgonomy. Since years you can find there the work of the IOO, also cooperation works with PORE in measurement data of our orgone accumulators, and lot more of scientific work, include video clips. The photos of the IOO web side are the photos from our work, and not pictures from others.

This is all what we have to say about this item.

best to all

Orgone Technique

ORAC forum

From: Jogg

Did Reich always make the same type of Accumulator? No.

Tom Ross was Wilhelm Reich's close friend and also caretaker Orgonon who made Reich's early accumulators in the 40's-50's. In an interview of Tom Ross, that I was transcribing with permission of Trettin, Ross speaks about the different accumulators materials that were tried that collimated into the design used in the 50's.

A year and a half ago I had to dismantle my full body size accumulator when I moved to a smaller dwelling. I recently purchased a Orgone blanket. I find it to be the best replacement for the box Orac and that it is PORTABLE is fantastic. It has a strong charge that can be felt easily. You can wrap your whole body in it as well. I am sure others make good orgone blankets as well but I only had the opportunity to try the one I received. My son had a some scrapes on his body this summer from sliding down a short water fall. I placed him in the ORAC blanket for 50 min and then a few hours later for 30 minutes. I was amazed to see the reddened skin mark scrapes on his back were gone and the scrape on the front chest was 50% less. It sure seemed to be the effect of the ORAC blanket or could it be my son was just a quick healer. He felt the tingling and warmth from the blanket immediately.

I say bravo to the people who produce ORAC's of all shapes and variety for the people of the world to buy. You do a great service to humanity.

cheers .......Jogg

PS. Please remember that the OML is not a place for posting prices and advertising sales as a primary message of an email. A brief referral to a web page or web site should do. I probably offended someone by my above comments but that was not the intent it at all. Let us all try to lighten up and have a laugh at ourselves as well. Morton Herskowitz stated that the last few therapy sessions he had with Reich were filled with a bunch of laughter. Glad to hear it was and that Reich had a sense of humor. Many in Orgonomy should remember a sense of humor when they get so serious about Orgone Energy.

ORAC forum

Dear People,
It has come to my attention that Trettin, et al, orgone accumulator manufacturers from Germany, are making claims that I have copied their accumulator design. To set the record straight, approximately ten years ago they shared with me the special right angle fastener that they use instead of L braces to hold the accumulator panels together. I will gladly share this bit of information with everyone, it is the Trapeze Fitting #262.61.100 by
Hafele and should be available from most specialty hardware stores. If not, I will sell them to anyone who wants them for .40 each plus $3.00 shipping and handling. It takes about 20 for a full size accumulator.

Several other features of our accumulators are different, yet both basically follow the original design by Reich and published in various journals over the years (I don't know why they call theirs the Trettin/Friehold IOO (?)
accumulator as though they invented it).

Differences:
My dimensions are taken from the most efficient use of standard size material sheets that are 48" in width in the US. I cut the linear dimensions to accommodate the average person.

I use carded sheep's wool instead of fiberglass. Being a machinist and former industrial manager, I found it always best to find substitutes for hazardous, contaminating materials, which fiberglass is. I tested the sheep's
wool against the fiberglass in plant seedling experiments and with people's subjective feeling. In both cases, the sheep's wool gave the same, and often better performance with people saying that the sheep's wool gave a "softer", more pleasant feel.

The outer layer of the panels is made from 1/4" formaldehyde-free Medite particle board which has no odor and a fine surface.

Additionally, I coat the Medite with three coats of natural shellac which Reich also found to have an accumulating effect as well as protecting the surface if the accumulator is placed in a semi-outdoor location.

My chest and leg board is actually 2 panels that are 3 ply accumulators and not just pieces of wood with metal tacked onto one side.

The floor is supported with braces that leave gaps for layers of sheep's wool and steel wool to actually touch the metal interior and not, again, a solid board with metal tacked to one surface.

My shooter design with interior dimensions in the ratio of 1.6: 1: .6 and a removable lid for charging materials. This design was adapted by Trettin et al to their accumulator. My metal funnel is coated with layers of beeswax
for an additional orgonotic charge.

These extra details I incorporate into my orgone accumulators makes them much more time consuming to build and hence the higher cost (at present with the current exchange rate). All my product prices include the shipping costs. Also, I am a one-woman production facility and do everything personally.

Additionally, I take the extra time to remove as much oil from the steel wool in my blankets as I can by rolling the strips in newspaper and pressing them through a wringer and then allowing them to sit for days/weeks to let the newspaper absorb as much of the oil as possible before using it in a blanket. Soon, I will be introducing steel wool that is thicker and already fabricated into a solid blanket for the layer of the blanket that goes next to the body--it gives a very powerful charge, much like the layer of galvanized steel sheet inside of a large accumulator.

My catalog also features more specialized forms of orgone accumulators to assist people in their various needs such as belts, vests, wands, shooters, and a range of sizes and prices for the blankets.

I have been designing and making orgone accumulators since the mid 1970s and hope the above information clarifies some of the issues raised. To learn more about what I sell, please see www.orgonics.com

Sincerely,
Theirrie Cook
Sole Proprietor

• Return to PORE main page
• See our Email address, Disclaimers, Copyright, Trademark. and Article submission statements

---

---

  LE FastCounter    In effect on several pages since October 16, 1998

---

---